10.3.5.1. Required ventilator output with artificial ventilation

<BR>

As with natural ventilation, the required flow of cooling-air C is derived from the output of the installed compressor. The waste heat generated by the compressor must be reliably extracted. The ventilator output V is approx. 15 % greater than the required flow of cooling-air • C. This guarantees perfect cooling, even in high Summer. The figures in the following table are based on VDMA specification sheet 4363 „Ventilation of installation rooms for air-cooled compressors“. <BR><BR>

<BR>

<BR>

---

[last chapter]
. . 10.3. Ventilation of a compressor station
. . . . 10.3.1. Factors influencing the flow of cooling air of a compressor
. . . . 10.3.2. Definition of the factors influencing the flow of cooling air to and from a compressor
. . . . 10.3.3. General information for ventilation of compressor rooms
. . . . 10.3.Ventilation4. Natural ventilation
. . . . . . 10.3.4.1. Outlet air aperture required for natural ventilation
. . . . 10.3.5. Artificial ventilation
. . . . . . 10.3.5.1. Required ventilator output with artificial ventilation * You are here *
. . . . . . 10.3.5.2. Required inlet air aperture with artificial ventilation
. . . . . . 10.3.5.3. Example of artificial ventilation of a compressor station
. . . . 10.3.6. Circulation of cooling-air with inlet and outlet ducts
. . . . . . 10.3.6.1. Air inlet ducts
. . . . . . 10.3.6.2. Extraction of air through a cool-air duct
. . . . . . 10.3.6.3. Required flow of cooling-air and cross-section of duct when using a cool-air duct
. . . . . . 10.3.6.4. Information concerning ventilation by ducting
. . . . . . 10.3.6.5. Dimensioning the air inlet aperture when using an outlet duct
. . . . . . 10.3.6.6. Variations of duct-type ventilation
[next chapter]